Coveralls – DuPont Tyvek 500 HP Hooded Coverall, Four D-Ring Sleeves, White (Case of 25), TY178SWH

Description

*PRICED PER CASE OF 25.

Item #: TY178SWH

Workers operating with a full-body harness in environments where hazardous particle or light liquid aerosol hazards are present, previously had to compromise between efficient personal protection* and protecting their full-body harness against external contamination. The new Tyvek 500 HP TY178S HP garment offers a unique solution protection of both the wearer and the full-body harness by providing a barrier between the user and the particle or light liquid aerosol hazards* in the environment. Designed to be worn over a full-body harness, the innovative, patent-pending garment design allows workers to access and utilize multiple D-Rings on their full-body harness while providing an ideal balance of protection, durability, and comfort. This new TY178S HP model has four attached sleeves for use with front, back and side D-Rings of a full-body harness. The off-centered zipper entry allows accommodating the front D-Ring sleeve for front D-Ring connection. *The user must ensure the garment is suitable for the chemical hazard before use. Please refer to chemical permeation data available in SafeSPEC to help you understand the level of protection the garment offers.

Compatible with a variety of full-body harness models, this garment may be used for a wide range of applications including painting, cleaning, maintenance, and more.

• Innovative, patent-pending design for applications where full-body harness is worn; garment is designed to be worn over the full-body harness
• Multiple access points to the full-body harness through the four elasticized D-Ring sleeves that are attached to the garment one in the front, one in the back, and one on each side of the garment
• Off-centered zipper entry to accommodate the front D-Ring sleeve for front D-Ring connection
• Certified according to Regulation (EU) 2016/425.
• Chemical protective clothing, Category III, Type 5-B and 6-B
• EN 14126 (barrier to infective agents), EN 1073-2 (protection against radioactive contamination)..
• Antistatic treatment (EN 1149-5) on both sides of the fabric
• 3-piece hood with elastic face opening
• Stitched seams
• Tyvek thumb loops
• Pin locking slider locks in place when the pins on the puller are pushed into the zipper elements
• Tyvek storm flap
• Elasticated ankles & wrists and elasticated (glued-in) waist
• Ample crotch area
• Manufactured under specifications that do not contain silicone or silicone oils
• Dynamic Fall Test with an articulated mannequin Tested in an independent testing laboratory as well as at a harness manufacturer with a conclusion that the Tyvek 500 HP TY178S HP garment is not anticipated to affect the dynamic fall test performance of the full-body harness when worn underneath this garment. The test is successful as it demonstrated that the Tyvek 500 HP TY178S HP garment is not impairing the proper function of the full-body harness in case of a fall.

Technical Data Sheet