Cleco 19PCA06Q P-Handle Pneumatic Screwdriver | 19 Series | Push and Trigger Start | 260 RPM | 0.8 – 3.7 (ft-lbs) Torque Range

Description

Built for controlled fastening in production assembly, the Cleco 19PCA06Q P-handle pneumatic screwdriver combines push and trigger start operation with a 260 RPM free speed for steady rundown on threaded fasteners that need repeatable torque instead of high-speed driving. Its 0.8 – 3.7 ft-lbs torque range supports light-to-medium assembly work, while the Clecomatic clutch (a torque-control clutch that shuts off at the set torque) helps improve fastening consistency across repeated cycles.The P-handle configuration gives operators a firm grip shape for applying axial force during prevailing-torque fastener work, and the 1/4″ quick change drive accepts common insert bits and compatible fastening accessories. With a compact 8.5″ overall length, 1.51 lb weight, 1/4″ NPT air inlet, and 11 SCFM air consumption, the 19PCA06Q is suited for assembly stations where controlled torque, hand access, and repeatable start behavior matter more than maximum speed.Type: P-Handle Pneumatic Screwdriver | Series: 19 Series | Start Type: Push and Trigger Start | Clutch Type: Clecomatic Clutch | Drive: 1/4″ Quick Change | Tool Torque Range: 10 – 45 in-lbs / 1.1 – 5.1 Nm | Torque Range with Standard Spring: 10 – 38 in-lbs / 1.1 – 4.3 Nm | Free Speed: 260 RPM | Overall Length: 8.5″ / 216 mm | Weight: 1.51 lbs / 0.7 kg | Air Inlet: 1/4″ NPT | Minimum Hose I.D.: 3/8″ | Air Consumption: 11 SCFMFeatures:Durable Clecomatic clutch supports repeatable torque control for assembly fastening where consistency is critical.Push and trigger start operation helps prevent accidental run-down while still allowing quick activation at the fastener.P-handle shape allows force to be applied in line with the fastener, useful for prevailing-torque screws and seated fasteners.1/4″ quick change drive allows fast bit changes during mixed-fastener assembly work.Reverse lever can be rotated to accommodate left- or right-handed operators at the workstation.Two grip sizes are available within the 19 Series platform for improved fit across different operators.Tool performance is rated at 90 PSI / 620 kPa air pressure for standard compressed-air assembly systems.Made in USA: Tech Tip: To increase tool performance, extend tool life, and lessen repair costs, use it with a Filter-Regulator-Lubricator FRL)Applications:Automotive and vehicle component assembly where repeatable torque is needed on screws, brackets, covers, and trim-related fasteners.Aerospace and precision assembly stations requiring controlled pneumatic rundown with a compact pistol-style tool.Appliance and equipment manufacturing for fastening panels, housings, subassemblies, and light mechanical components.Electronics and light industrial assembly where 1/4″ hex tooling and lower torque ranges are commonly used.MRO and repair benches that need a controlled pneumatic screwdriver for recurring fastening work instead of manual screwdriving.FAQs:Q: What does push and trigger start mean on the Cleco 19PCA06Q?A: Push and trigger start means the tool is activated through a combination of operator trigger control and bit engagement at the fastener. This helps reduce unintended starts compared with a simple trigger-only setup.Q: What bits fit this screwdriver?A: The 19PCA06Q uses a 1/4″ quick change drive, so it is intended for compatible 1/4″ hex insert bits and fastening accessories. Always match the bit style and size to the fastener being driven.Q: Is the listed torque range the same as the standard spring range?A: No. The tool range is 10 – 45 in-lbs / 1.1 – 5.1 Nm, while the torque range with the standard spring is 10 – 38 in-lbs / 1.1 – 4.3 Nm. Use the spring range when setting up the tool with the supplied standard spring configuration.Q: What air supply does this tool require?A: Tool performance is rated at 90 PSI / 620 kPa. The manufacturer lists 11 SCFM air consumption, a 1/4″ NPT air inlet, and a minimum 3/8″ hose I.D.Q: When should I choose a P-handle screwdriver instead of an inline screwdriver?A: A P-handle screwdriver is helpful when the operator needs a pistol-style grip and wants to apply forward force into the fastener. Inline screwdrivers are often preferred for straight-down vertical fastening or suspended tool setups. .spec-accordion{width:100%;max-width:1200px;margin:1em auto;font-family:”Montserrat”,Arial,sans-serif;box-sizing:border-box} .spec-accordion *{box-sizing:border-box} .spec-accordion-toggle{width:100%;display:flex;justify-content:center;align-items:center;position:relative;background:#444;color:#fff;border:0;padding:14px 48px;font-family:”Bai Jamjuree”,Arial,sans-serif;font-size:16px;font-weight:700;text-transform:uppercase;cursor:pointer;text-align:center} .spec-accordion-toggle::after{content:”+”;font-size:22px;position:absolute;right:18px} .spec-accordion.open .spec-accordion-toggle::after{content:””} .spec-accordion-panel{display:none!important;width:100%;padding:16px 0 0} .spec-accordion.open .spec-accordion-panel{display:block!important} .spec-accordion-panel[hidden],.spec-accordion:not(.open) .spec-accordion-panel{display:none!important} .spec-table-wrapper{width:100%;max-width:1200px;margin:0 auto;overflow-x:visible!important;overflow-y:visible!important} .spec-table{width:100%!important;max-width:1200px;min-width:0!important;margin:0 auto;border-collapse:collapse;table-layout:fixed;font-family:”Montserrat”,Arial,sans-serif;font-size:12px;color:#000} .spec-table th{background:#444;color:#fff;text-transform:uppercase;font-family:”Bai Jamjuree”,Arial,sans-serif;font-weight:700;font-size:11px;padding:8px 4px;border:1px solid #ddd;text-align:center;line-height:1.15;white-space:normal;word-break:break-word} .spec-table td{padding:6px 4px;border:1px solid #eee;text-align:center;line-height:1.15;white-space:normal;word-break:break-word} .spec-table .long-text{white-space:normal} .spec-table tbody tr:nth-child(even){background:#f7f7f7} .spec-table tbody tr:hover{background:#e5e5e5} .spec-table a{color:#0066cc;text-decoration:none;font-weight:600;background:transparent;padding:0;border-radius:0;box-shadow:none} .spec-table a:hover{text-decoration:underline} .group-row td{background:#444;color:#fff;font-family:”Bai Jamjuree”,Arial,sans-serif;font-weight:700;text-transform:uppercase;text-align:left} @media(max-width:640px){.spec-accordion,.spec-table-wrapper,.spec-table{width:100%;max-width:100%}.spec-accordion-toggle{font-size:14px;padding:13px 48px}} .spec-accordion.is-mobile-table .spec-table-wrapper{overflow-x:visible!important;overflow-y:visible} .spec-accordion.is-mobile-table .spec-table{width:100%;max-width:100%;min-width:0!important;border:0} .spec-accordion.is-mobile-table .spec-table thead{display:none!important} .spec-accordion.is-mobile-table .spec-table,.spec-accordion.is-mobile-table .spec-table tbody,.spec-accordion.is-mobile-table .spec-table tr,.spec-accordion.is-mobile-table .spec-table td{display:block;width:100%} .spec-accordion.is-mobile-table .spec-table tr{margin-bottom:14px;border:1px solid #ddd;background:#fff} .spec-accordion.is-mobile-table .spec-table tbody tr:nth-child(even),.spec-accordion.is-mobile-table .spec-table tbody tr:hover{background:#fff} .spec-accordion.is-mobile-table .spec-table th,.spec-accordion.is-mobile-table .spec-table td{white-space:normal!important} .spec-accordion.is-mobile-table .spec-table td{display:flex;justify-content:space-between;gap:14px;text-align:right;border:0;border-bottom:1px solid #eee;padding:10px 12px;font-size:13px;word-break:break-word} .spec-accordion.is-mobile-table .spec-table td::before{content:attr(data-label);font-weight:700;text-transform:uppercase;color:#444;text-align:left;flex:0 0 46%} .spec-accordion.is-mobile-table .spec-table td>a{word-break:break-word;background:transparent} .spec-accordion.is-mobile-table .group-row td{text-align:center;background:#444;color:#fff} .spec-accordion.is-mobile-table .group-row td::before{content:none} Available Variations and SpecificationsSKUTORQUE RANGEFREE SPEEDLENGTHWEIGHTAIR CONSUMPTIONAIR INLET SIZEMIN NMMAX NMMIN FT LBMAX FT LBR/MININLBKGSCFMIN19PCA02Q0.62.10.41.528008.11.430.65111/419PCA03Q0.62.90.42.119008.31.50.68111/419PCA04Q1.14.50.83.311008.11.410.64111/419PCA05Q1.15.10.83.76608.51.50.68111/419PCA06Q1.15.10.83.72608.51.50.68111/419PCA07Q1.76.81.256608.51.50.68111/419PCA09Q1.78.91.26.54709.81.650.75111/4 (function(){ function initSpecAccordions(){ document.querySelectorAll(“.spec-accordion”).forEach(function(a){ if(a.dataset.specAccordionInit===”true”)return;a.dataset.specAccordionInit=”true”; var b=a.querySelector(“.spec-accordion-toggle”),p=a.querySelector(“.spec-accordion-panel”);if(!b||!p)return; var u=false; function m(){return(a.getBoundingClientRect().width||window.innerWidth)