Cleco 24RAA19AM3 Clutch Shut-Off Pneumatic Angle Nutrunner | Collar Reverse | Lever Start | 24 Series | 700 RPM | 3/8″ Square Drive | 7 – 14 (ft-lbs) Torque Range

Description

Built for controlled fastening in compact assembly areas, the Cleco 24RAA19AM3 clutch shut-off pneumatic angle nutrunner combines a 7 – 14 ft-lbs torque range with a 700 RPM free speed to support repeatable rundowns without slowing production flow. Its 3/8″ square drive accepts common industrial sockets, while the right-angle head helps reach fasteners positioned close to housings, brackets, frames, and fixture walls. The Clecomatic clutch is a shut-off clutch, meaning it automatically stops air flow when the preset torque is reached, helping reduce over-tightening on assembly work.The collar reverse and lever start configuration gives operators direct control for forward fastening and reverse removal, while the indexable angle head allows the tool head position to be oriented for better access at the workstation. With 3.2 lb weight, 15.0″ overall length, 1.16″ head height, and 0.52″ side-to-center distance, this 24 Series Cleco nutrunner is suited to repetitive production fastening where access, torque control, and line consistency matter.Type: Pneumatic Angle Nutrunner | Brand: Cleco | Model: 24RAA19AM3 | Series: 24 Series | Torque Control: Clecomatic Clutch Shut-Off | Start Type: Lever Start | Reverse Type: Collar Reverse | Drive Size: 3/8″ Square Drive | Torque Range: 7 – 14 ft-lbs / 10 – 19 Nm | Free Speed: 700 RPM | Length: 15.0″ / 380 mm | Weight: 3.2 lb / 1.4 kg | Head Height: 1.16″ / 29.5 mm | Side to Center: 0.52″ / 13.2 mm | Air Inlet: 3/8″ NPT | Minimum Hose I.D.: 5/16″ | Air Consumption: 24 SCFM | Rated Air Pressure: 90 PSI / 620 kPaFeatures:Clecomatic clutch shut-off stops the tool at the user-adjusted preset torque for controlled fastening on repetitive assembly jobs.Right-angle body reaches fasteners located near walls, housings, brackets, or other obstructions where inline tools may not fit.Indexable angle head allows the head position to be oriented to the application, improving workstation setup flexibility.External torque adjustment lets maintenance or production teams set torque without full tool disassembly.Collar reverse supports both fastening and reverse removal while keeping the reverse control close to the tool head.Lever start gives the operator positive throttle control during rundown and fastener seating.Oil-less blades help reduce oil mist in the work area, supporting cleaner assembly environments.Standard equipment includes operating instructions and service manual, suspension bail, and clutch adjustment tool.Made in USA: Tech Tip: To increase tool performance, extend tool life, and lessen repair costs, use it with a Filter-Regulator-Lubricator FRL)Applications:Production assembly: Tightening bolts and nuts on fixtures, frames, brackets, and subassemblies where torque repeatability is important.Automotive and transportation manufacturing: Fastening medium-size hardware in chassis, interior, component, and support-structure assembly operations.Appliance and equipment assembly: Running down fasteners on housings, panels, and mounted components where a right-angle head improves access.Industrial MRO and repair stations: Removing and reinstalling fasteners during equipment service when the required torque falls within the tool range.Fixture-based workcells: Supporting repeatable tightening in bench, line-side, or semi-automated assembly areas where pneumatic tooling is already in use.FAQs:Q: What does clutch shut-off mean on the Cleco 24RAA19AM3?A: Clutch shut-off means the tool stops driving when the preset torque is reached. This helps improve torque repeatability compared with tools that rely only on operator feel.Q: What socket type fits this nutrunner?A: This model uses a 3/8″ square drive, so it accepts compatible 3/8″ square-drive sockets rated for powered assembly use.Q: Is this the correct tool for high-torque lug nut removal?A: No. The 24RAA19AM3 has a 7 – 14 ft-lbs torque range and is intended for controlled assembly fastening, not impact-style breakaway work or high-torque wheel service.Q: What air supply does this tool require?A: Cleco rates tool performance at 90 PSI / 620 kPa. This model lists 24 SCFM air consumption, a 3/8″ NPT air inlet, and a 5/16″ minimum hose I.D.Q: Why choose an angle nutrunner instead of an inline screwdriver or pistol tool?A: An angle nutrunner places the drive at 90 degrees to the tool body, helping operators reach fasteners in corners, recessed locations, and assembly areas where straight tools do not have enough clearance. .spec-accordion{width:100%;max-width:1200px;margin:1em auto;font-family:”Montserrat”,Arial,sans-serif;box-sizing:border-box} .spec-accordion *{box-sizing:border-box} .spec-accordion-toggle{width:100%;display:flex;justify-content:center;align-items:center;position:relative;background:#444;color:#fff;border:0;padding:14px 48px;font-family:”Bai Jamjuree”,Arial,sans-serif;font-size:16px;font-weight:700;text-transform:uppercase;cursor:pointer;text-align:center} .spec-accordion-toggle::after{content:”+”;font-size:22px;position:absolute;right:18px} .spec-accordion.open .spec-accordion-toggle::after{content:””} .spec-accordion-panel{display:none!important;width:100%;padding:16px 0 0} .spec-accordion.open .spec-accordion-panel{display:block!important} .spec-accordion-panel[hidden],.spec-accordion:not(.open) .spec-accordion-panel{display:none!important} .spec-table-wrapper{width:100%;max-width:1200px;margin:0 auto;overflow-x:auto;overflow-y:hidden;-webkit-overflow-scrolling:touch} .spec-table{width:100%!important;max-width:1200px;min-width:100%;margin:0 auto;border-collapse:collapse;table-layout:auto;font-family:”Montserrat”,Arial,sans-serif;font-size:12px;color:#000} .spec-table th{background:#444;color:#fff;text-transform:uppercase;font-family:”Bai Jamjuree”,Arial,sans-serif;font-weight:700;font-size:11px;padding:8px 6px;border:1px solid #ddd;text-align:center;line-height:1.15;white-space:nowrap} .spec-table td{padding:6px;border:1px solid #eee;text-align:center;line-height:1.15;white-space:nowrap} .spec-table .long-text{white-space:normal} .spec-table tbody tr:nth-child(even){background:#f7f7f7} .spec-table tbody tr:hover{background:#e5e5e5} .spec-table a{color:#0066cc;text-decoration:none;font-weight:600;background:transparent;padding:0;border-radius:0;box-shadow:none} .spec-table a:hover{text-decoration:underline} .group-row td{background:#444;color:#fff;font-family:”Bai Jamjuree”,Arial,sans-serif;font-weight:700;text-transform:uppercase;text-align:left} @media(max-width:640px){.spec-accordion,.spec-table-wrapper,.spec-table{width:100%;max-width:100%}.spec-accordion-toggle{font-size:14px;padding:13px 48px}} .spec-accordion.is-mobile-table .spec-table-wrapper{overflow-x:visible!important;overflow-y:visible} .spec-accordion.is-mobile-table .spec-table{width:100%;max-width:100%;min-width:0!important;border:0} .spec-accordion.is-mobile-table .spec-table thead{display:none!important} .spec-accordion.is-mobile-table .spec-table,.spec-accordion.is-mobile-table .spec-table tbody,.spec-accordion.is-mobile-table .spec-table tr,.spec-accordion.is-mobile-table .spec-table td{display:block;width:100%} .spec-accordion.is-mobile-table .spec-table tr{margin-bottom:14px;border:1px solid #ddd;background:#fff} .spec-accordion.is-mobile-table .spec-table tbody tr:nth-child(even),.spec-accordion.is-mobile-table .spec-table tbody tr:hover{background:#fff} .spec-accordion.is-mobile-table .spec-table th,.spec-accordion.is-mobile-table .spec-table td{white-space:normal!important} .spec-accordion.is-mobile-table .spec-table td{display:flex;justify-content:space-between;gap:14px;text-align:right;border:0;border-bottom:1px solid #eee;padding:10px 12px;font-size:13px;word-break:break-word} .spec-accordion.is-mobile-table .spec-table td::before{content:attr(data-label);font-weight:700;text-transform:uppercase;color:#444;text-align:left;flex:0 0 46%} .spec-accordion.is-mobile-table .spec-table td>a{word-break:break-word;background:transparent} .spec-accordion.is-mobile-table .group-row td{text-align:center;background:#444;color:#fff} .spec-accordion.is-mobile-table .group-row td::before{content:none} Available Variations and SpecificationsSKUTORQUE RANGEFREESPEEDLENGTHWEIGHTHEAD HEIGHTSIDE TOCENTEROUTPUT DRIVEAIR CON-SUMPTIONAIR INLETSIZEMIN NMMAX NMMIN FT LBMAX FT LBR/MININLBKGININSCFMIN24RAA11AL37.010.85.08.0126014.12.601.181.080.473/8 SQUARE DRIVE23.93/824RAA12AM37.012.25.09.0120014.22.801.271.160.523/8 SQUARE DRIVE23.93/824RAA19AM310.0197.014.070015.03.201.451.160.523/8 SQUARE DRIVE23.93/824RAA23AM312.023.09.017.060015.03.201.451.160.523/8 SQUARE DRIVE23.93/8 (function(){ function initSpecAccordions(){ document.querySelectorAll(“.spec-accordion”).forEach(function(a){ if(a.dataset.specAccordionInit===”true”)return;a.dataset.specAccordionInit=”true”; var b=a.querySelector(“.spec-accordion-toggle”),p=a.querySelector(“.spec-accordion-panel”);if(!b||!p)return; var u=false; function m(){return(a.getBoundingClientRect().width||window.innerWidth)