Ingersoll Rand QA1L05S4SD Angle Air Nutrunner | 500 RPM | 3.5 – 26.1 (in-lbs) Torque Range | Adjustable Shut-Off Clutch

Description

For controlled fastening in assemblies where access is restricted and a slower rundown speed is preferred, the Ingersoll Rand QA1L05S4SD Angle Air Nutrunner combines 500 RPM free speed with a 3.5 to 26.1 in-lb torque range and an adjustable shut-off clutch. The angle configuration helps operators reach fasteners around housings, brackets, fixtures, and closely spaced components, while the clutch automatically stops the fastening cycle when the preset torque point is reached.The Ingersoll Rand QA1L05S4SD uses its 500 RPM speed to provide deliberate fastener rundown for compatible production joints that benefit from greater control over the tightening cycle. Its adjustable shut-off clutch provides a defined cycle endpoint within the specified torque range, helping reduce reliance on manual operator timing during repetitive assembly work. This combination suits production environments where restricted fastener access, controlled speed, and repeatable fastening are important process considerations.Type: Angle Air Nutrunner | Model: QA1L05S4SD | Configuration: Angle | Free Speed: 500 RPM | Torque Range: 3.5 – 26.1 in-lbs | Clutch Type: Adjustable Shut-OffFeatures:Adjustable shut-off clutch automatically stops the fastening cycle when the preset torque point is reached.500 RPM free speed provides deliberate fastener rundown for compatible controlled-fastening applications.3.5 to 26.1 in-lb torque range allows tool output to be adjusted for production joints within the specified capability.Angle configuration supports access where housings, brackets, fixtures, or nearby components restrict straight-line tool positioning.Automatic shut-off provides a defined fastening endpoint and reduces reliance on the operator to manually stop each cycle.Slow-speed configuration supports assembly processes where controlled rundown takes priority over rapid fastener installation.Pneumatic operation supports repetitive production fastening when supplied with properly conditioned compressed air.Made in USA: Applications:Automotive component assembly tightening compatible fasteners around brackets, housings, fixtures, and closely spaced production components.Appliance manufacturing completing controlled fastening inside frames and internal assemblies where straight-tool access is limited.Electrical and electromechanical equipment production reaching fastening points within cabinets, equipment assemblies, and compact component layouts.General production assembly handling repetitive low-torque fastening where deliberate rundown and automatic shut-off support process control.Fixture-based workstations accessing recessed or side-oriented fasteners that are difficult to approach with an inline fastening tool.FAQs:Q: What torque range does the Ingersoll Rand QA1L05S4SD provide?A: The specified torque range is 3.5 to 26.1 in-lbs. Establish the appropriate clutch setting on the actual production joint according to the fastener, joint characteristics, component materials, and assembly requirements.Q: What is the advantage of the 500 RPM speed?A: The slower speed provides a more deliberate fastener rundown than higher-speed configurations. It can suit assembly processes where controlled tightening and operator oversight are more important than minimizing cycle time.Q: How does the adjustable shut-off clutch work?A: The clutch is set for the required fastening torque within the tool’s specified range. When the preset torque point is reached, the nutrunner automatically shuts off to provide a controlled endpoint for the cycle.Q: Why choose an angle air nutrunner instead of an inline tool?A: The angle configuration can improve access to fasteners positioned near housings, brackets, fixtures, or adjacent components where straight-line tool alignment is difficult.Q: Should completed fasteners still be verified when using automatic shut-off?A: Yes. Joint characteristics, fastener condition, component materials, drive tooling, and compressed-air conditions can affect final results. Set the tool on the actual production joint and verify completed fasteners according to the required quality-control procedure. .variation-details { width: 100%; max-width: 100%; margin: 10px 0; padding: 0; border: 0; background: #ffffff; box-sizing: border-box; overflow: visible; } details.variation-details > summary.variation-summary { position: relative !important; display: flex !important; align-items: center !important; justify-content: center !important; width: 100% !important; height: 46px !important; min-height: 46px !important; max-height: 46px !important; margin: 0 !important; padding: 4px 48px !important; box-sizing: border-box !important; list-style: none !important; background: #444444 !important; color: #ffffff !important; font-family: Arial, Helvetica, sans-serif !important; font-size: 18px !important; line-height: 1 !important; font-weight: 700 !important; text-align: center !important; text-transform: uppercase; cursor: pointer; user-select: none; } details.variation-details > summary.variation-summary::-webkit-details-marker { display: none !important; } details.variation-details > summary.variation-summary::marker { content: “” !important; } details.variation-details > summary.variation-summary::after { content: “+” !important; position: absolute; right: 20px; top: 50%; transform: translateY(-50%); color: #ffffff; font-family: Arial, Helvetica, sans-serif; font-size: 24px; line-height: 1; font-weight: 700; } details.variation-details[open] > summary.variation-summary::after { content: “” !important; } .variation-content { width: 100%; max-width: 100%; min-width: 0; margin: 0; padding: 14px 0 0; box-sizing: border-box; overflow: visible !important; } .variation-table { width: 100% !important; max-width: 100% !important; min-width: 0 !important; margin: 0 !important; border-collapse: collapse; border-spacing: 0; table-layout: fixed; font-family: Arial, Helvetica, sans-serif; font-size: clamp(7px, 0.9vw, 15px); line-height: 1.1; color: #222222; background: #ffffff; } .variation-table th, .variation-table td { min-width: 0 !important; max-width: none !important; padding: 7px 2px; box-sizing: border-box; vertical-align: middle; text-align: center; white-space: normal !important; overflow-wrap: anywhere; word-break: normal; border: 1px solid #e5e5e5; } .variation-table th { height: 44px !important; padding: 4px 2px !important; background: #444444; color: #ffffff; font-size: clamp(6px, 0.8vw, 13px); line-height: 1.05; font-weight: 700; text-transform: uppercase; } .variation-table td { background: #ffffff; color: #222222; font-weight: 400; } .variation-table tbody tr:nth-child(even):not(.group-heading) td { background: #f7f7f7; } .variation-table .group-heading td { padding: 6px 12px !important; background: #7d8a90 !important; color: #ffffff !important; border-color: #7d8a90 !important; font-size: clamp(8px, 1vw, 16px); line-height: 1.05; font-weight: 700; text-align: left; text-transform: uppercase; } .variation-table a { color: #006fd6; text-decoration: none; font-weight: 700; } .variation-table a:hover, .variation-table a:focus { text-decoration: underline; } @media (max-width: 900px) { details.variation-details > summary.variation-summary { height: 42px !important; min-height: 42px !important; max-height: 42px !important; padding: 3px 42px !important; font-size: 16px !important; } details.variation-details > summary.variation-summary::after { right: 16px; font-size: 22px; } .variation-content { padding-top: 10px; } .variation-table { font-size: 8px; } .variation-table th { height: 40px !important; padding: 3px 1px !important; font-size: 8px; } .variation-table td { padding: 6px 1px; } } @media (max-width: 600px) { details.variation-details > summary.variation-summary { height: 38px !important; min-height: 38px !important; max-height: 38px !important; padding: 3px 35px !important; font-size: 13px !important; } details.variation-details > summary.variation-summary::after { right: 11px; font-size: 20px; } .variation-content { padding-top: 6px; } .variation-table { font-size: 6px; line-height: 1; } .variation-table th { height: 36px !important; padding: 2px 1px !important; font-size: 6px; } .variation-table td { padding: 4px 1px; } .variation-table .group-heading td { padding: 4px 5px !important; font-size: 7px; } }Available Variations and Specifications ModelTorque Range 1in-lbs (Nm)Torque Range 2in-lbs (Nm)Torque Range 3in-lbs (Nm)RPMWeightlbs (kg)Lengthin (mm)Head Heightin (mm)Side to Centerin (mm)DriveinLever StartQA1L18S4SD3.511.5 (0.41.3)9.326.1 (1.052.95)1,7501.9 (0.9)11.8″ (300)0.38″ (9.5)1.1″ (28)1/4″QA1L18S1LD3.511.5 (0.41.3)9.326.1 (1.052.95)1,7502.1 (1.0)11.9″ (302.3)0.52″ (13.2)1.3″ (33)1/4″QA1L12S4LD3.511.5 (0.41.3)9.332.2 (1.13.64)1,2702.1 (1.0)11.9″ (302.3)0.52″ (13.2)1.3″ (33)1/4″QA1L12S4SD3.511.5 (0.41.3)9.332.2 (1.13.64)1,2701.9 (0.9)11.8″ (300)0.38″ (9.5)1.1″ (28)1/4″QA1L12S1LD3.511.5 (0.41.3)9.332.2 (1.13.64)1,2702.1 (1.0)11.9″ (302.3)0.52″ (13.2)1.3″ (33)1/4″QA1L12S9LD3.511.5 (0.41.3)9.332.2 (1.13.64)1,2702.1 (1.0)11.9″ (302.3)0.52″ (13.2)1.3″ (33)1/4″QA1L08S4LD3.511.5 (0.41.3)9.333.4 (1.053.77)15.747.2 (1.775.33)8502.1 (1.0)11.9″ (302.3)0.52″ (13.2)1.3″ (33)1/4″QA1L08S6LD3.511.5 (0.41.3)9.333.4 (1.053.77)15.747.2 (1.775.33)8502.1 (1.0)11.9″ (302.3)0.52″ (13.2)1.3″ (33)3/8″QA1L08S1LD3.511.5 (0.41.3)9.333.4 (1.053.77)15.747.2 (1.775.33)8502.1 (1.0)11.9″ (302.3)0.52″ (13.2)1.3″ (33)1/4″QA1L05S4SD3.511.5 (0.41.3)9.336.0 (1.054.07)5001.9 (0.9)11.8″ (300)0.38″ (9.5)1.1″ (28)1/4″QA1L05S4LD3.511.5 (0.41.3)9.333.4 (1.053.77)15.756.4 (1.776.37)5002.1 (0.9)11.9″ (302.3)0.52″ (13.2)1.3″ (33)1/4″QA1L05S6LD3.511.5 (0.41.3)9.333.4 (1.053.77)15.756.4 (1.776.37)5002.1 (0.9)11.9″ (302.3)0.52″ (13.2)1.3″ (33)3/8″QA1L05S6XLD11.738.2 (1.324.32)31.088.3 (3.59.98)5002.3 (1.04)13.0″ (330)0.52″ (13.2)1.3″ (33)3/8″QA1L05S9LD3.511.5 (0.41.3)9.333.4 (1.053.77)15.756.4 (1.776.37)5002.1 (1.0)11.9″ (302.3)0.52″ (13.2)1.3″ (33)1/4″QA1L05S1LD3.511.5 (0.41.3)9.333.4 (1.053.77)15.756.4 (1.776.37)5002.1 (1.0)11.9″ (302.3)0.52″ (13.2)1.3″ (33)1/4″QA1L05S1XLD11.738.2 (1.324.32)31.088.3 (3.59.98)5002.3 (1.04)13.0″ (330)0.52″ (13.2)1.3″ (33)1/4″QA1L02S4LD3.511.5 (0.41.3)9.333.4 (1.053.77)15.756.4 (1.776.37)2502.1 (1.0)11.9″ (302.3)0.52″ (13.2)1.3″ (33)1/4″QA1L02S1LD3.511.5 (0.41.3)9.333.4 (1.053.77)15.756.4 (1.776.37)2502.1 (1.0)11.9″ (302.3)0.52″ (13.2)1.3″ (33)1/4″QA1L02S6XLD11.738.2 (1.324.32)31.0101.5 (3.5011.5)2502.3 (1.04)13.0″ (330)0.52″ (13.2)1.3″ (33)3/8″QA1L02S1XLD11.738.2 (1.324.32)31.0101.5 (3.5011.5)2502.3 (1.04)13.0″ (330)0.52″ (13.2)1.3″ (33)1/4″Looking for more information about theIngersoll Rand Nutrunner?Click hereto view theCatalogFor help choosing the proper Ingersoll RandNutrunners foryour assembly application, please email [email protected] or call (800) 608-5210