Sealant – Flex Seal Hybrid or Silicone Flex Caulk, White or Clear

Description

Item #: CN680 / CN600

HIGH-PERFORMANCE, RUBBERIZED CAULK & SEALANT. NO CAULK GUN NEEDED.

Flex Caulk Hybrid (advanced hybrid polymer caulk) and Flex Caulk Silicone (100% silicone caulk) are Flex Seal’slatest innovations in caulking technology. They are delivered through their Adjustable Trigger Flow Nozzle, which eliminates the need for a caulking gun and allows you to control the flow of caulk. Just adjust the flow setting and push the trigger for a perfect bead. And when you stop, it stops. There’s no running, no dripping, and no mess.

NO CAULK GUN NEEDED EASY TO USE!

• Adjustable Trigger Flow Nozzle.
• Seals out water, air, and moisture.
• Flexible and durable, lasts for years.
• Fully paintable (Hybrid Only).
• 100% waterproof and weatherproof.
• UV, chemical, and mildew resistant.
• Adheres to wet or dry surfaces, even underwater (Hybrid Only).
• Use indoors or outdoors.
• Wont shrink, crack, or become brittle.
• Snap & Save cap eliminates waste.
• Fast drying, solvent-free, and wont yellow.
• Virtually Odorless (Hybrid Only)
• Perfect for hard-to-reach areas.
• Available in WHITE and CLEAR.

Excellent for:bathrooms, kitchens, sinks, showers, toilets, backsplashes, countertops, baseboards, moulding, pipes, skylights, windows, doors, auto and boat repairs, and more.

Works on:porcelain, tile, metal, glass, fiberglass, wood, granite, stone, marble, fabric, upholstery, paper, and just about any other surface that is free of grease and oil.

Recommended use:Flex Caulk Siliconeworks best on smooth, non-porous materials.Flex Caulk Hybridadheres to both porous and non-porous materials.

FLEX CAULK DIRECTIONS

Use in a well-ventilated area (Silicone). Make sure surface is clean, free of dirt, grease, and oil. Remove the tab (where the can meets the adjustable nozzle) before initial use. Remove Snap & Save cap. Adjust the flow setting to MAX. Hold can a 45 angle and push the trigger to start flow. Keep pushing trigger while moving the nozzle across the area. Always use a smooth, even motion when applying the caulk. Bead thickness is controlled by the flow setting and speed you move. Remove excess caulk with a dry paper towel. Do not use water. Material can be smoothed within 10 minutes of application and cures in 24 hours (depending on temperature and humidity). After use, wipe off the nozzle tip, secure the Snap & Save cap, and turn the flow setting counterclockwise, past MIN, until it stops.

To Reuse:

Remove the Snap & Save cap. Turn nozzle RIGHT (clockwise) to the MAX position. Press the trigger to start caulk flow. If caulk doesnt flow, unscrew and remove the nozzle, use a nail or similar tool to clear any blockage in the nozzle, screw the nozzle back on, and press the trigger to start caulk flow.

*Flex Caulk contains a preservative which inhibits the growth of mildew on the surface of this caulk